Special skills and tools are needed when it comes to working with concrete. The best way to cut or drill your concrete precisely is to utilise the right tool design for the kind of work you want to accomplish. If you do not have the skills to do the task, you can always find a reliable provider to do it for you.
With these few aspects, you will be able to produce high-quality work for concrete cutting and drilling. Here is a comparison guide to help you drill or cut concrete efficiently and smoothly.
This type comes in two ways: diamond chain and cut-of machines. The diamond chain one will help you to do the deeper concrete cutting. You can use it to cut a perfect corner without an over-cut. This machine is more versatile than the cut-off one. For concrete cutting, this is the best choice. It can assist you to do various kinds of jobs with it.
The cut-off machine is the one that has circular blades. It is an ideal choice for cutting small stones for paving stones. In terms of weight, they are light, and you can handle them very quickly. You may consider using this type if you want more minor cuts.
One important thing to know about the cut-off machines is that their blades come in different sizes. The depth of the cut using this machine will depend on the size of the blades you use. The cutting will not be the same as the radius of the blade you use. It will be less than that. Therefore between the two, you can use the correct one for your concrete cutting work.
We have more than one type of concrete drill machine for concrete drilling. The most used ones are the non-impact and impact drills.
The impact drill machine has a more percussive and rotational force which can help your drilling process. Here you have to choose the drill bits based on the hardness of the concrete. For hard concrete, the most used bits available are diamond or carbide tips. Make your selection careful of the bits. The correct drill bit can help you to do the concrete drilling faster and effectively.
The non-impact one uses a specific drill tip that is the diamond one. This machine can drill holes that are bigger in terms of diameter as compared to impact drills. This machine is usually cooled using water because there is a lot of friction produced while doing the concrete drilling job. You have to remove the slurry produced in the drill machine when the water for cooling combines with dust.
It does not matter the process you do for concrete cutting or drilling. You should always clean the tools or machines after you finish using them. For your health, you should wear protective garments like a mask, goggles, or gloves to prevent dust from entering your eyes or inhaling it accidentally. Also, most of the gas-powered ones are more powerful than the electric ones. So when selecting the machines pay much attention to which among them is suitable for your job.