Natural stone like marble and granite are undoubtedly beautiful additions to any home. However, you must take proper care of the stone surface to keep them free of damage and clean. Though rigid and robust, such feelings can catch stains easily and are porous. Their polish might also get fade.
It requires periodic cleaning to keep the natural stone surface at the pink of its health. However, always follow the manufacturer’s instructions and use the right natural Stone Deep Clean product that he recommends.
Below are some handy cleaning tips for such surfaces:
Things you will need:
- Neutral pH All-Purpose Cleaner or Neutral pH Dish Soap
- Wet mop or microfiber mop with rotating handle
- Broom or vacuum cleaner with a rotating deactivated brush
- A bucket
Easy steps to clean:
- Step 1:
The first step is to sweep the floor with a broom or vacuum to remove any minute dirt particles. However, before starting you should de–clutter the surface. If you are cleaning any room, you should first remove any rugs, furniture, and valuable accessories from the area. Try to limit your intense cleaning to those stones that need the same. Do less deep cleaning to other places and try to protect those areas using drop cloths. Try to keep the room well ventilated by keeping doors and windows open.
- Step 2:
Next, take a bucket and fill it with warm water. You can mix the Neutral All-Purpose cleaner or just use the water to clean the surface. You can also use dish soap, or a natural stone deep clean solution recommended by the manufacturer. Remember that you need to change the water when it turns dirty or cloudy.
- Step 3:
In the next step, you need to dip the wet mop in the warm water and soap solution and start cleaning the floor. You can also dip the microfiber towel and attach it to the mop handle. That will save you time and energy.
- Step 4:
Start washing the floor surfaces starting from the outermost corner of the room and continue methodically towards the exit way.
- Step 5:
Let the surface dry.
Do’s and don’t:
- You should never use products that come with vinegar, lemon juice, or other high pH acids. Using such chemicals on natural stone surfaces like travertine, limestone or marble is a big no-no.
- Try to keep away abrasive surface cleaners like microfiber scrub, steel wool, or scrapers. Using such materials will scratch the natural stone surface.
- Any ammonia-based cleaner will make the surface dull. So, it is good to stick to the manufacturer’s recommended stone deep clean solution.
- Use a sealant on your stone’s surface while installing and cleaning. Follow the guidelines specified by your manufacturer.
It mainly requires deep cleaning of natural stone surfaces in areas like the fireplace and the outdoors. This post has undoubtedly helped you to find some quick tips to deep clean any natural stone surface. Keep in mind to use the right cleaner and master the proper way of sealing the surface.